Aegis AEGIS 1000 Manual de Instalação descarregar pdf (Página 43)

Page 43

MODULE 2 TYPE - MODULE 4 TYPE

Module 2 is the module with the jumper set to 2, and so on. Set each module type from the list above.

SERIAL 1 RATE

Serial 1 Rate is the baud rate used for the built-in serial interface (J5 Serial) on the Aegis 1000 controller. Select the baud rate for

the built-in serial interface from the list below. Use the arrow keys to select the baud rate then press #.

BAUD RATE NUMBER

75 baud 1

150 baud 2

300 baud 3

600 baud 4

1200 baud 5

2400 baud 6

4800 baud 7

9600 baud 8 (default)

SERIAL 1 FUNCTION

The "Serial 1 Function" selects the communication protocol used for the built-in serial interface (J5 Serial) on the Aegis 1000

controller. Select the function for the built-in serial interface from the list. Use the arrow keys to select the function then press

the ' # ' key.

FUNCTION TYPES NUMBER DESCRIPTION

AEGIS-LINK 3 Serial communication using the Aegis-Link protocol

PRO-LINK 4 Serial communication using the Pro-Link protocol

SERIAL 2 RATE

Serial 2 Rate is the baud rate used when a Serial Interface Module is added to the Aegis 1000 controller. If a Serial Interface

Module is installed, select its baud rate then press the ' # ' key.